Thursday , 5 December 2024

Method Development and Validation for Rapid Simultaneous Estimation of Tinidazole and Diloxanide Furoate in Pharmaceutical Dosage form by Using RP-HPLC

Kavi Soundarya1, Gampa Vijay Kumar2
1KGR Institute of Technology and Management, Rampally, Kesara, Rangareddy, Telangana, India.
2Professor and Head, Dept. of Pharmacy, KGR Institute of Technology and Management, Rampally, Kesara, Rangareddy, Telangana, India.

ABSTRACT
A new method was established for simultaneous estimation of Tinidazole and Diloxanide furoate by RP-HPLC method. The chromatographic conditions were successfully developed for the separation of Tinidazole and Diloxanide furoate by using Thermosil  RP C18(4.5×100 mm) 5.0 µm, flow rate was 1ml/min, mobile phase ratio was (70:30 v/v) methanol: Sodium acetate buffer pH 3 (pH was adjusted with orthophosphoric acid), detection wavelength was 240nm. The instrument used was WATERS HPLC Auto Sampler, Separation module 2695, photo diode array detector 996, Empower-software version-2. The retention times were found to be 2.408 mins and 3.016 mins. The % purity of Tinidazole and Diloxanide furoate was found to be 99.24% and 101.27% respectively. The system suitability parameters for Tinidazole and Diloxanide furoate such as theoretical plates and tailing factor were found to be 4668, 1.3 and 6089 and 1.2, the resolution was found to be 6.2. The analytical method was validated according to ICH guidelines (ICH, Q2 (R1)). The linearity study n Tinidazole and Diloxanide furoate was found in concentration range of 50µg-250µg and 5µg-50µg and correlation coefficient (r2) was found to be 0.999 and 0.999, % recovery was found to be 100.56% and 101.47%, %RSD for repeatability was 0.1 and 0.3, % RSD for intermediate precision was 0.19 and 0.57respectively. The precision study was precise, robust, and repeatable.LOD value was 4.27 and 6.80, and LOQ value was 0.0272 and 0.3125 respectively.
Keywords: Thermosil  RP C18 column, Tinidazole and Diloxanide furoate, RP-HPLC

Scroll To Top